Conventional heat detector model F10
The SensoMAG F10 thermal detector is a conventional model with a digital algorithm.
This detector detects temperatures above 60. C (classA2S according to EN54 standard).
This detector has the ability to work with any fire alarm system that has a range of 15 to 20 mA.
This detector is for areas where the sudden temperature changes a lot
And this change is in the form of a fixed model, or places where there are high-concentration water vapor,
Or gases from burning gas, such as burners or dust.
Such as kitchens, parking lots, motorhomes or areas where it is not possible to operate the smoke detector.
General specifications of conventional thermal detector model F10
Equipped with digital algorithm
Equipped with temperature detection sensor above 60 سان C based on classA2S
The area covered is 35 square meters
Maximum installation height 3.5 m
Equipped with 2 flashing lights
The flash light flashes every 8 seconds
With EN54-5 standard
Technical Specifications
۲۴ volt detector working voltage
Consumption current with base B24 in 20mA alarm mode
Ampere / line voltage to turn on the remote 20mA / 3.3V
Suitable temperature for operation 10 ° C to + 60 ° C-
Relative idol humidity and allowable temperature of 93% -40. C
IP30 protection class
It weighs about 102 grams
Detector dimensions 102x42mm
نقد و بررسیها
هنوز بررسیای ثبت نشده است.