دتکتور ترکیبی (دود و حرارت) SensoirisM140IS مدل آدرس پذیر هوشمند با ایزولاتور داخلی میباشد. این دتکتور تحت پشتیبانی پروتکل TTE (پروتکل اختصاصی کمپانی Teletek) میباشد. این دتکتور تغذیه اش را نیز از خط لوپ گرفته و از طریق پروتکل اختصاصیش قابل کنترل میباشد. پایه مخصوص این دتکتور مدل B124 میباشد. این دتکتور دارای گارانتی مادام العمر میباشد.
مشخصات کلی دتکتور دود آدرس پذیر مدل M140 IS
-
حساسیت این دتکتور ها از طریق کنترل پانل مرکزی قابل برنامه ریزی میباشد High/Normal/Middle/Low
-
کلاس تحت پوشش سنسور کشف حرارت A1R
-
مساحت تحت پوشش ۱۲۰ متر مربع
-
حداکثر ارتفاع نصب ۱۶ متر
-
قابلیت کارکرد به شکل تنظیمات روزانه و شبانه (Day & night)
-
دارای چراغ LED با قابلیت دید ۳۶۰ درجه
-
دارای استاندارد EN54-7
-
دارای ایزولاتور داخلی این دتکتور میباشد.
مشخصات فنی آشکارساز اعلام حریق آدرس پذیر مدل M140 IS
ولتاژ کار دتکتور | ۳۰-۱۵ ولت |
جریان مصرفی در حالت نرمال | ۱۶۰μA@27VDC |
جریان مصرفی در حالت آلارم | ۶٫۵mA |
ولتاژ و جریان خروجی از پایهirدتکتور | ۷٫۵mA (max) / 7.5V |
سایز ترمینال پایه دتکتور جهت نصب سیم | ۰٫۴mm2 – 2.0mm2 |
درجه حرارت مناسب جهت بهره برداری | ۱۰°C to +60°C- |
کلاس حفاظتی | IP30 |
وزن | در حدود ۱۲۵ گرم |
ابعاد دتکتور | ۱۰۳x42mm |
Addressable smoke detector model M140 IS
The SensoirisM140IS Combined Detector (Smoke and Heat) is a smart addressable model with an internal insulator. This detector is supported by the TTE protocol (Teletek’s proprietary protocol). This detector also takes its power from the loop line and can be controlled through its own protocol. The base of this detector is model B124. This detector has a lifetime warranty.
General specifications of M140 IS addressable smoke detector
The sensitivity of these detectors can be programmed by controlling the central panel High / Normal / Middle / Low
Class covered by A1R heat detection sensor
Area covered by 120 square meters
The maximum installation height is 16 meters
Ability to work in the form of daily and night settings (Day & night)
It has an LED light with 360 degree visibility
It has EN54-7 standard
It has an internal insulator of this detector.
Technical specifications of M140 IS addressable fire alarm detector
Working voltage of the detector is 30-15 volts
Normal current consumption is 160μA @ 27VDC
Consumption current in alarm mode 6.5mA
Voltage and output current from base ir detector 7.5mA (max) / 7.5V
Detector base terminal size for wire installation 0.4mm2 – 2.0mm2
Suitable temperature for operation 10 ° C to + 60 ° C-
IP30 protection class
Weight about 125 grams
Detector dimensions 103x42mm
نقد و بررسیها
هنوز بررسیای ثبت نشده است.