کنترل پنل متعارف ۸ زون مدل MAG8P
کنترل پنل MAG8P دارای ۸ زون متعارف ثابت با تاییدیه EN54-2/4 میباشد.
بر روی هر زون این دستگاه ۳۲ عدد دتکتور SENSOMAG قابل نصب میباشد.
تعداد شستی اعلام حریق قابل نصب برای هر زون محدودیتی ندارد.
این دستگاه دارای قاب پلاستیکی میباشد. نصب ، پشتیبانی و راهبری این کنترل پانل بسیار ساده میباشد.
این دستگاه برای مناطق مسکونی ، ادارات کوچک با سطح مقطع حداکثر۳۰۰۰ متر مربع مناسب میباشد.
این مرکز اعلام حریق در چند زبان مختلف دنیا (برچسب اصلی مرکز) آماده ارائه میباشد.
مشخصات کلی پنل اعلام حریق متعارف مدل MAG8P
-
دارای هشت زون ثابت ، قابلیت نصب ۳۲ عدد دتکتور SENSOMAG در هر زون و نصب بدون محدودیت شستی اعلام حریق
-
دارای دو خروجی آژیر و حداکثر جریان هر خط آژیر ۵۰۰ میلی آمپر
-
دارای یک خروجی رله آتش و یک رله خروجی فالت
-
قابلیت ساپورت ماژول ثبت وقایع
-
قابلیت تنظیم جهت آژیر زدن با تاخیر
-
قابلیت تکرار پذیری توسط ۴ رشته سیم ۱٫۵* ۲ میلیمتر مربع در فاصله ۱۰۰۰ متری
-
دارای ماژول انتهای خط جهت کنترل وضعیت زون (اتصال کوتاه ، مدار باز و… )
-
مجهز به چند زبان دنیا (برچسب اصلی مرکز)
-
دارای چراغهای نشانگر
-
دارای کلید جهت سطح دسترسی کلیدها
-
قاب پلاستیکی
مشخصات فنی کنترل پنل متعارف ۸ زون مدل MAG8P
منبع تغذیه اصلی | ۲۳۰VAC±۱۰%/۵۰-۶۰Hz |
جریان مصرفی منبع تغذیه اصلی | ۱۲۵mA |
خروجی تغذیه کمکی (Aux) | ۲۴VDC/ 0,3A fuse |
منبع تغذیه پشتیبان | One Battery, 12V/ 18Ah |
دمای کارکرد | ۵°C to +40°C- |
وزن (بدون باطری) | ۲٫۴kg |
ابعاد | ۳۴۰x290x100mm |
The conventional MAG8P fire alarm panel
The MAG8P control panel has 8 standard fixed zones with EN54-2 / ۴ approval. 32 SENSOMAG detectors can be installed on each zone of this device. The number of fire alarms that can be installed for each zone is not limited. This device has a plastic frame. Installation, support and navigation of this control panel is very simple. This device is suitable for residential areas, small offices with a cross-sectional area of up to 3000 square meters. This fire alarm center is ready to be offered in several different languages of the world (the main label of the center).
General specifications of MAG8P conventional fire alarm panel
It has eight fixed zones, the ability to install 32 SENSOMAG detectors in each zone and install without fire alarm restrictions.
It has two siren outputs and a maximum current of 500 mAh
It has a fire relay output and a falt output relay
Ability to support event recording modules
Adjustable delay for siren
Repeatable capability by 4 1.5 * 2 mm square wires in a distance of 1000 meters
It has a module at the end of the line to control the status of the zone (short circuit, open circuit and 2)
Equipped with several world languages (main center tag)
It has indicator lights
It has a key for the access level of the keys
Plastic frame
Technical specifications of MAG8P conventional fire alarm panel
Main power supply 230VAC ± ۱۰% / ۵۰-۶۰Hz
Main power supply current consumption 125mA
Auxiliary power output (Aux) 24VDC / 0.3A fuse
One Battery backup power supply, 12V / 18Ah
Operating temperature 5 ° C to + 40 ° C-
Weight (without battery) 2.4kg
Dimensions 340x290x100mm
جهت آشنایی با محصولات بیشتر کلیک کنید.
نقد و بررسیها
هنوز بررسیای ثبت نشده است.